Hard Hat: Dark Blue, No Graphics, Ratchet (4-Point), Ratchet, Polyethylene, Side-Slots
270,00 EGPEa
Hard Hat:No Graphics, Pinlock, Polyethylene, Side-Slots, ABILITY ONE, Basic Colors
130,00 EGPEaGeneral purpose front-brim (Type 1, Class E) hard hats are non-vented and they have a front brim to protect the face from sun, reduce glare, and help shed rain. Type 1, Class E hard hats protect wearers from vertical impacts and high-voltage conductors (up to 20KV). These hard hats are used by construction workers, road crews, and other workers as required by OSHA.
Hex Head Cap Screw: Steel, Grade 2, Plain, 1/4″-20, Coarse, 1/2 in lg, Hex
51,00 EGPKgLow strength hex cap screws are made from standard hardware-grade steel. Low strength screws can be used on metal or wood. They are a low-cost fastener for use in light-duty applications where the screw is not subject to extreme temperatures or stress.
iLOCK Fast Charging Cable 100 Watt USB-C to Type-C | Braided Cable | LED Indicator
Price range: 51,00 EGP through 189,00 EGPPlacerat tempor dolor eu leo ullamcorper et magnis habitant ultrices consectetur arcu nulla mattis fermentum adipiscing a et bibendum sed platea malesuada eget vestibulum tempor dolor eu leo ullamcorper et magnis habitant ultrices consectetur.
iLOCK LED Strip Light | 3000K Warm White | 5 Meters | 240 LEDs
399,00 EGPScelerisque facilisi rhoncus non faucibus parturient senectus lobortis a ullamcorper vestibulum mi nibh ultricies a parturient gravida a vestibulum leo sem in. Est cum torquent mi in scelerisque leo aptent per at vitae ante eleifend mollis adipiscing.
Ingco General Purpose Phillips Screwdriver,#0 Tip Size, 5 in Overall Lg, 2 1/2 in Shank Lg
Original price was: 85,00 EGP.80,00 EGPCurrent price is: 80,00 EGP.EaGeneral purpose Phillips screwdrivers come in an assortment of Phillips tip sizes for use in a variety of applications. Phillips screwdrivers have a Phillips-style tip at the end of the shaft that is cross shaped and is inserted into the Phillips indentation in the screwhead and the handle is turned to rotate the screw.
Metallic Conduit (RMC), Heavy-Wall: RMC, 3/4 in , 10 ft Lg, Steel
45,00 EGPEaHeavy-wall RMC metal conduit is the most durable and rugged type of metallic conduit. It has the heaviest and thickest walls, making it suitable for routing and protecting conductors in areas that could be exposed to abuse, as well as outdoors and in direct-burial applications. This conduit can also provide structural support for electrical cable, panels, and other equipment. RMC has one threaded male end and one threaded female connector. Uncoupled ends are covered by industry color-coded thread protectors, which keep them clean and sharp and aid in trade size recognition.
Ornare auctor
429,00 EGPConsequat a scelerisque suspendisse vel et eget eu vitae adipiscing nibh scelerisque semper cum adipiscing facilisis adipiscing est accumsan lorem vestibulum. Aliquet mus a aptent ullam corper metus accumsan. Habitasse a purus nec ipsum a urna ac ullamcorper varius metus blandit posuere.
SikaTop® Seal-107
71,00 EGPEaSika Top Seal-107 is used for external and internal waterproofing, crack sealing, repair work and protection from frost and detrimental effects of deicing agents.
Stanley General Purpose Phillips Screwdriver,#0 Tip Size, 5 in Overall Lg, 2 1/2 in Shank Lg
71,00 EGPEaGeneral purpose Phillips screwdrivers come in an assortment of Phillips tip sizes for use in a variety of applications. Phillips screwdrivers have a Phillips-style tip at the end of the shaft that is cross shaped and is inserted into the Phillips indentation in the screwhead and the handle is turned to rotate the screw.
Tank Toilet: 1.28 Gallons per Flush, Elongated Bowl, Left Hand Trip Lever
5.000,00 EGPEaFloor-mount gravity-tank one-piece toilets are molded as a single unit so there’s no joint between the tank and bowl. They ease cleaning by leaving no gap where grime can build up. These fixtures are less likely to leak or break than two-piece toilets and are also shorter and more compact to fit into small bathrooms. They fasten to the floor for stability.
